• Quantity:
Total: to quote
Cart is empty.

Photovoltaic Module 12V 150W (160W) + 12V 100Ah Battery + 10A Solar Charger + MC4 Connectors + Gauge #30200164

Photovoltaic Module 12V 150W (160W) + 12V 100Ah Battery + 10A Solar Charger + MC4 Connectors + Gauge #30200164
You Save:
€114.46 (25%)
Combination not available


Solar KIT composed of monocrystalline photovoltaic 160 Watts panel, gauge, MC4 connectors, PWM 10A solar charger and AGM 100Ah battery for all applications such as boats, camper vans, cabins, shelters and 12V systems.
The kit contains:
- 1 160W Monocrystalline Photovoltaic Module - Dimensions: 1480 x 670 x 35 mm (our code 30050175);
- 1 Solar Charge Controller PWM 10A 12V - Dimensions: 13,3x7,1cm (our code 30550701);
- 1 AGM 12V-100Ah battery - Dimensions (LxHxW): 34 x 22 x 16.3 cm (our code 20050930);
- 1 MC4 Cabur male connector (our code 30750303);
- 1 MC4 Cabur female connector (our code 30750304);
- 1 Digital DC Amps Volts Watt Power Gauge + Energy Meter (Our code 34900000).

160W 12V Monocrystalline  Photovoltaic module.
160W 12V Monocrystalline Photovoltaic Solar Panel. Designed for rural lighting solutions, data collection and special applications. Thanks to its versatility, the panel is very popular and used both in developing countries as well as the European market. This panel was designed to work under the most difficult climatic and working conditions. The design of the anodized aluminium frame makes the panel safe, simple and quick to install in many applications. Every single cell and panel produced undergoes a series of tests and quality controls during every phase of production. The interconnections between panels are easy, practical and optimized for every configuration and voltage.

- Type: SS160-36M;
- Module efficiency: 16%;
- Cell efficiency: 17.5%;
- Peak power: 160W;
- Vm (voltage at maximum p.): 18.5V;
- Im (maximum current): 8.65A;
- Voc (open circuit voltage): 22.5V;
- Isc (short circuit current): 9.14A;
- Power tolerance: +-3%;
- Dimensions: 1480 x 670 x 35 mm;
- Weight: approx 12 Kg;
- Maximum system voltage: 1000VDC.

PWM Charge Controller for PV systems 12 Volt. Suitable to charge GEL, AGM or acid batteries via traditional 36 cell photovoltaic panels. Charges batteries in boats, RVs, cabins and lodges, alarm systems.
With battery status LED indicator.
- Voltage configurations: 12V;
- Rated charging current: 10A;
- Output: 1;
- Working temperature: -35/+55°C;
- Protection: IP30;
- Type: Stand Alone, Boat/Camper;
- Dimensions: 13,3x7,1 cm;
- Weight: 0,119 Kg;
- LCD display: NO.

AGM 100Ah 12V UP battery.
Sealed batteries with AGM technology, are designed for both cyclic and buffer use. The unique construction technique makes these batteries totally hermetic preventing potential leakage of gas or acid in any position of operation.
These batteries are maintenance free and can operate at temperatures from - 20 to + 45%.
This special battery C10 has the characteristic of power suffer discharges faster compared to normal batteries.
The most common use of these batteries is:
- As backup batteries.
- Photovoltaic systems.
- On-board services.
- Setting up of gasoline outboards.
- Road sign illumination.
- Photovoltaic Street Lights.
- Nominal voltage: 12V;
- Nominal capacity: 100 Ah (C10);
- Constant voltage charge;
- Voltage regulation;
- Cycle use: 14.4 - 15.0 V (25°C);
- Standby use: 13.5 - 13.8 V (25°C);
- Dimensions (LxHxW): 34 x 22 x 16.3 cm;
- Weight: about 30kg.

MC4 Cabur male and female connectors designed specifically for rapid and reliable connections for PV applications with the most common inverter and junction box. Contacts are made with tinned copper and casing in PPO.

LINE 4, with Metal contacts D.4 mm.
Technical data:
- PIN dimension: D.4mm;
- Maximum voltage: 1000 VDC;
- Maximum current: 30A at 70°C - 25A at 85°C;
- Contact resistance: <5m Ohm
- Contact material: Cu;
- Plating: Tin;
- Insulation: PPO.
Environmental conditions:
- Protection degree: IP67 (IEC 60529);
- Temperature range: -40°C +90°C;
- Flammability level: UL94-VO.

Digital DC Amps Volts Watt Meter + Energy Meter.
This meter is great to use as an inexpensive way to spot check renewable energy system for power production.
Measures 8 Parameters + Energy Counter. Great tool with many uses!
- For direct current.
- Measures 8 Parameters.
- Input voltage: From 4.8V to 60V
- Input voltage (with auxiliary power): From 0V to 60V
- Current: From 0A to 150A (resolution 0.01A)
- Max continuous current = 65A
- Power: From 0W toa 6554W (resolution 0.1W)
- Energy: From 0Wh to 6554Wh (resolution 0.01Wh)
- Display: Backlit display 2.4" LCD
- Dimensions: 85 x 42 x 25 mm
- Weight: 82 g.

The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY.  After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document:
Declaration Form 
In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice.
The declaration form and ID document must be sent to:  
iva-agevolata@shopenergia.com or fax +39 0431 687013.