• Quantity:
Discount:
Shipping:
Payment:
Taxes:
Total: to quote
Cart is empty.

International Antifouling Uni-Pro 250 Black YBP164 5Lt #458COL1154

International Antifouling Uni-Pro 250 Black YBP164 5Lt #458COL1154
Listing:
€420.29
Price:
€179.90
You Save:
€240.39 (57%)
Combination not available

Description

5 litre Pack. Black YBP164 colour.


UniPro 250 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals.
A Polishing Antifouling suitable for professional application onto vessels in fresh and salt water.
Designed specifically to provide up to one year protection for both sailing and power boats.

PRODUCT INFORMATION
Colour YBP164 Black
Finish Matt
Specific Gravity 1.8 average
Volume Solids 60% average
Typical Shelf Life 2 yrs
VOC (As Supplied) 353 g/L average
VOC (EU Solvent) 193 g/Kg average EU Solvent Emissions Directive (Council Directive 1999/13/EC)

APPLICATION AND USE
Preparation
PREVIOUSLY ANTIFOULED SURFACE:
In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
In Poor Condition: Use Interstrip to remove all traces of antifouling.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE GRP: Prime with Gelshield 200 for osmosis protection, or Primocon or Interprotect.
STEEL/IRON/LEAD/WOOD: Prime with Interprotect or Primocon.
PLYWOOD: Prime with Epiglass followed by Interprotect.

Hints
Mixing: Thoroughly stir until product is mixed to a uniform consistency before use.
Thinning: Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.
Cleaner: YTA085 International Antifouling Thinners #3.
Airless Spray: Pressure 176220 bar/25003200 psi. Tip size: 517 to 521.
Ventilation and Humidity Control: Ensure adequate ventilation during use.
Other: Antifoulings should only be wet sanded. Never dry sand or burnoff old antifoulings. True colour will develop after immersion.

Downloads